• Toughness plus = SUNLU PLA plus, Say No to Brittle SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter colour, higher strength lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odourless, making good print results.
• 1.75mm 1KG Pack Vacuum Pack PLA + Filament 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
• Good Layer Adhesion and No Plugging 3D Printing Material Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
• High Precision +/- 0.02mm Tolerance 1.75mm PLA+ 3D filament (Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
• High Compatibility & 100% Environmental Material Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN (3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.

SUNLU PLA+ 3D Printer Filament

SUNLU PLA+ Filament is are made of premium PLA+ material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odour during the printing.

It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.

FAQ:

Why can't the filaments stick to the hotbed easy?

1).Check the temperature setting before printing, PLA filament temperature about 190-220°;

2).Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;

3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;